|
|
|
Innovative Hydrodynamic Separator (IHS) enables to treat every kind of solid efficiently within a short time. In a reactor, centrifugal separation, screening, static precipitation and filtration can be performed. It is installable for non-point source control, pretreatment of wastewater, rainwater utilization, and pretreatment for rainwater storage basin and rainwater pumping center. |
|
Pretreatment Basin
:Through the centrifugal revolution of fluids and the difference of specific gravity of materials, it simply separates gloss solids including sediments, draws a removable basket, and then removes deposited solids. |
Treatment Basin
:The fluid that flows in through the bottom external tube:
1) Centrifugal-revolves mathematically by a guiding plate and gets removed by friction and cyclone;
2) The velocity of the running fluid slows down rapidly while it passes in the direction of screen contact;
3) In the screen, static precipitation is possible and gravity precipitation made;
4) Some micro particles that are not removed out pass through the removable carrier, having small head loss while the fluid goes up. The efficiency of removal becomes improved by filtration.
|
|
Planned Flux
§©/d(§©/sec) |
Max. Capacity
(§©/sec) |
Inlet pipe size
(cm) |
Pre-treatment Basin (m)
|
Micro-particle Treatment Basin |
Total Area(§³)
(W m* L m) |
Coverage
ha(=10*§³) |
Diameter
|
Height |
Diameter
|
Height |
500(0.006) |
0.012 |
15 |
0.9 |
1.12 |
0.9 |
1.2 |
1.4 * 2.3 |
10~20 |
1200(0.014) |
0.028 |
20 |
1.2 |
1.50 |
1.2 |
1.50 |
1.7 * 2.9 |
24~48 |
2500(0.029) |
0.058 |
25 |
1.5 |
1.88 |
1.5 |
1.88 |
2.0 * 3.5 |
50~100 |
4000(1.146) |
0.092 |
30 |
1.8 |
2.26 |
1.8 |
2.26 |
2.3 * 4.1 |
80~200 |
10000(0.116) |
0.232 |
40 |
2.1 |
2.64 |
2.45 |
3.00 |
3.0 * 5.1 |
200~400 |
20000(0.231) |
0.462 |
50 |
2.1 |
2.64 |
3.06 |
3.50 |
3.6 * 5.7 |
400~800 |
30000(0.347) |
0.694 |
60 |
2.1 |
2.64 |
3.45 |
4.00 |
4.0 * 6.1 |
600~1200 |
|
* In case of using an improved rain gutter for pretreatment, the total area is reduced to less than half or omitted.
* The pretreatment basin can remove solids with less than 1mm-sized particles and its specifications and quantity vary according to the load of gloss solids. |
|
|
|
|